Canon imagePROGRAF iPF850 Setup Guide - Page 5
Attach the Media Take-up Unit, Set Up the Output Stacker, Prepare to Turn the Power
View all Canon imagePROGRAF iPF850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Attach the Media Take-up Unit (Option) Attach the media take-up unit (optional) which automatically takes up printed roll paper. -> Refer to the Media Take-up Unit Setup Guide included with the media take-up unit Set Up the Output Stacker Attach the wheeled output stacker or stationary output stacker to collect ejected paper. -> Refer to "Attach the Output Stacker" in the Printer Stand Setup Guide Prepare to Turn the Power On Remove the protective packaging material from the printer. 1 Remove the tape and other packaging material used to secure the printer. 2 Open the Top Cover. 3 Use the Allen Wrench to loosen the screw of the Belt Stopper (a). Rotate the Belt Stopper to the left and remove the stopper. a • Keep the Belt Stopper you removed MEMO and the Allen Wrench for future use. You will need them in case you move the printer to another location. • When you open the top cover, a cleaning brush is stored on the right side. Take it out and use it when cleaning inside the top cover. (when using the stationary output stacker or the stacker) 4 Lift the Ejection Guide. 5 Attach the four Ejection Supports (a) on the back of the Ejection Guide. a