Canon imagePROGRAF iPF850 Setup Guide - Page 9

Install the Printhead 1 When Open top cover. is displayed on the display screen, open the top cover. 2 Pull the printhead fixer lever forward all the way to open it completely. 3 Lift the printhead fixer cover (a) to open it fully. At this time, make sure that no debris becomes adhere to the contacts (b) on the carriage. a Instructions are now shown on the display screen regarding printhead installation. b 4 Hold the printhead by the grips (a) as you remove it from the pouch. 5 Remove the orange protective part (a). To remove orange protective part (b), push the grip (c) as you remove the part. bc 6 Insert the printhead into the carriage (b) with the ink holes (a) facing away from the printer as shown in the figure. Carefully push the printhead firmly into the carriage (b), ensuring that the part covered by the protective part does not touch the carriage. a a b a a • Never touch the parts covered by the protective part. This may damage the printhead and affect printing quality. • The printhead contains ink, so be careful not to spill it once the protective parts are removed. • Do not reattach the protective part after removing it. Dispose of these materials according to local regulations. 7 Pull the printhead fixer cover down toward the front to lock the printhead in place. 8 Push the printhead fixer lever back. 9 Close the top cover.