Carvin DCM2000LX Instruction Manual - Page 11
B Utility Menu
View all Carvin DCM2000LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4.B UTILITY MENU Press the UTILITY button to open the UTILITY menu. Use the Left/Right buttons to move through the menu. Press EXIT to return to the channel screen. 4.B.1 DELAY UNITS (a.) Press UTILITY for "Pg 1". (b.) Use Up/Down to display delay times in Seconds, Feet or Meters. (c.) Press Right for Page 2 or EXIT to escape. 4.B.2 DELAY TIME BANK This screen displays how much memory is remaining for use. The DCM-Lx starts with a total of 120mS of delay memory. As you assign more delay to channels, the remaining available memory time decreases. (a.) Press UTILITY then Right for "Pg 2". The available memory will display. (b.) Press Right for Page 3 or EXIT to escape. 4.B.3 INPUT SENSITIVITY The SENSITIVITY setting adjusts the input level required to reach maximum output when the front panel level controls are set to the maximum "0" setting. (a.) Press UTILITY then Right (2x) for "Pg 3". (b.) Use Up/Down to set the input sensitivity: 0.7, 1.0, 1.2, 1.4, or 2.0 Vrms. The factory set default is 1.4Vrms. (c.) Press Right for Page 4 or EXIT to escape. 4.B.4 TURN ON MUTE (a.) Press UTILITY then Right (3x) for "Pg 4". (b.) Using Up/Down: Choose ON to mute all outputs when the DCM-Lx is powered on. Choose OFF to leave outputs active at startup. (c.) Press Right for Page 5 or EXIT to escape. *Note: TURN ON MUTE will be bypassed if SECURITY LOCKOUT is ON. 4.B.5 SECURITY LOCKOUT - PASSWORD (a.) Press UTILITY then Right (4x) for "Pg 5". (b.) Use Up/Down to change the setting: Select ON to prevent any changes to the DCM-Lx settings. Settings will still be viewable, but no changes can be made. Select OFF to allow changes to the DCM-Lx settings. (c.)Enter the 4-digit password using the Channel (A/1, B/2, C/3, D/4) buttons. (d.) Press Right for Page 6 or EXIT to escape. *Note: The factory set default password is 1122. 4.B.6 PASSWORD CHANGE To change the 4-DIGIT PASSWORD, you must first enter the old password. (a.) Press UTILITY then Right (5x) for "Pg 6". (b.) Use the Channel (A/1, B/2, C/3, D/4) buttons to enter the old password. (c.) Press UTILITY. (d.) Use the Channel (A/1, B/2, C/3, D/4) buttons to enter the new password. 11