Carvin DCM2000LX Instruction Manual - Page 16

D.8 OUTPUT PARAMETRIC EQs PEQ 1-4, A/1, B/2, Right, Up/Down, Bandwidth, 12.0dB, 12.0dB, Frequency,

Get Carvin DCM2000LX PDF manuals and user guides View all Carvin DCM2000LX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

4.D.8 (OUTPUT) PARAMETRIC EQs (PEQ 1-4) The four bands of Parametric EQ on each Output are used to EQ the amp channels independently. Example: Output 1, Parametric EQ #4, BW=1/3oct. -4dB @ 6.8kHz (a.) Press (A/1, B/2, C/3 or D/4) to enter OUTPUT mode (CH, Number). (b.) Press Left or Right until a screen like the one above is shown. (c.) Use Left or Right to select the BW, GAIN, and FREQUECY for the PEQ. (d.) Use Up/Down to adjust the parameter. (e.) Press Left or Right for other PEQ1, PEQ2, PEQ3 or PEQ4 screens. Bandwidth: The upper right cursor position sets the BW (BandWidth) of the PEQ. The BW is adjustable from a narrow 0.16 octave to a wide 2.00 octaves. 0.16 octave has a narrow slope for picking out specific frequencies. 0.30 octave is about equal to one fader on a normal 30 band EQ, or 1/3 octave. 2.00 octaves has a bandwidth of 6 faders with a broad slope. Gain: The lower left cursor position sets the boost or cut from +12.0dB to -12.0dB. Frequency: The lower right cursor position sets the frequency in Hz from 20 to 20k. Press Right to access the PEQ2, PEQ3, PEQ4 settings. PARAMETRIC EQ SETTINGS: Figure 1 is a +12dB boost, 1kHz filter of varying bandwidths in octaves: 0.16oct.(1), 0.30oct.(2), 0.60oct.(3), 1.00oct.(4) and 2.00oct.(5). 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
16
4.D.8 (OUTPUT) PARAMETRIC EQs (PEQ 1-4)
The four bands of Parametric EQ on each Output are used to EQ the amp
channels independently.
Example: Output 1,
Parametric EQ #4,
BW=1/3oct.
-4dB @ 6.8kHz
(a.)
Press (
A/1, B/2,
C/3
or
D/4
) to enter OUTPUT mode (CH, Number).
(b.)
Press
Left
or
Right
until a screen like the one above is shown.
(c.)
Use
Left
or
Right
to select the BW, GAIN, and FREQUECY for the PEQ.
(d.)
Use
Up/Down
to adjust the parameter.
(e.)
Press
Left
or
Right
for other PEQ1, PEQ2, PEQ3 or PEQ4 screens.
Bandwidth
:
The upper right cursor position sets the
BW
(BandWidth) of the PEQ.
The
BW
is adjustable from a narrow
0.16
octave to a wide
2.00
octaves.
0.16
octave has a narrow slope for picking out specific frequencies.
0.30
octave is about equal to one fader on a normal 30 band EQ, or 1/3
octave.
2.00
octaves has a bandwidth of 6 faders with a broad slope.
Gain
:
The lower left cursor position sets the boost or cut from
+12.0dB
to
-12.0dB
.
Frequency
:
The lower right cursor position sets the frequency in Hz from
20
to
20k
.
Press
Right
to access the
PEQ2, PEQ3, PEQ4
settings.
PARAMETRIC EQ SETTINGS
:
Figure 1 is a +12dB boost, 1kHz filter of varying bandwidths in octaves:
0.16oct.(1), 0.30oct.(2), 0.60oct.(3), 1.00oct.(4) and 2.00oct.(5).