Casio QT 6000 Programming Manual - Page 10
How to initialize the terminal add / replace one terminal, 3. How to flag clear the terminal or
View all Casio QT 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Initialization 1-2. How to initialize the terminal (add / replace one terminal) Preparation: Operation: 1. All peripheral devices and terminals of this cluster should be turned off. 2. Connect all of the peripheral devices (such as printer, display etc.) to this terminal. 3. Connect the added / replaced terminal to inline. Follow the steps shown on the page 8 to 9. 1-3. How to flag clear the terminal (or INIT2) Preparation: Operation: 1. All peripheral devices and this terminal should be turned off. 2. Check the connection of all peripheral devices (such as printer, display etc.) of this terminal. 3. Check the connection of this terminal to inline. 4. Turn on all peripheral devices of this terminal. 5. Turn on this terminal with pressing the key. 6. Press key. FC Copyright(C) 2004 CASIO COMPUTER CO.,LTD. All rights reserved. ROM VER. xxxxxx xxxx CREATE xxxx-xx-xx xx:xx QT-6000 Version x.xx APL VER. xxxxxx xxxx P-10 OK 7. Select "1. Flag Clear" and press key to flag clear. or select "2.Init2" and press key and enter "8888888888" and key to Init 2.