Casio SA400 User Guide - Page 16

TELEPHONE OPERATION TELEPHONE OPERATION TELEPHONE OPERATION MEMORY STORAGE (cont.) AUTO BUSY REDIAL Auto busy redial automatically redials a busy line up to 10 times, at 10 second intervals. If the line is still busy after 4 minutes, the SA-400 will return to the idle mode. Automatic busy redial can be canceled anytime by pressing REDIAL again. AUTO REDIAL Once you get a busy signal: 1. Hang up. 2 . Press REDIAL twice. The unit will attempt to redial the number for 15 seconds and the AUTO REDIAL SPEAKERPHONE INDICATOR will flash rapidly. 3 . The SPEAKERPHONE INDICATOR will then flash slowly for 10 seconds before attempting to redial the number. 4 . The unit will redial the busy line up to 10 times or until the call is answered. 5 . Press to end the auto redial and begin speaking. 6 . Return the handset to the cradle or press to end the call. NO ANSWER REDIAL No answer redial automatically redials an unanswered line up to 10 times, at 30 second intervals. If no one answers the line after 4 minutes, the SA-400 will return to the idle mode. Automatic no answer redial can be canceled anytime by pressing REDIAL again. AUTO REDIAL Once you make a call where no one answers: 1. Hang up. 2 . Press REDIAL AUTO REDIAL twice. The unit will attempt to redial the number for 15 seconds and the SPEAKERPHONE INDICATOR will flash rapidly. 3 . The SPEAKERPHONE INDICATOR will then flash slowly for 10 seconds before attempting to redial the number. 4 . The unit will redial the unanswered line up to 10 times or until the call is answered. 5. Press to end the auto redial and begin speaking. 6 . Return the handset to the cradle or press to end the call. REVIEWING AUTODIAL ENTRIES To review stored autodial entries, 1. Press an AUTODIAL STATION key. 2 . The name and/or number programmed in the chosen autodial location will appear on the display. The screen will return to the default screen after thirty seconds. TELEPHONE OPERATION MEMORY STORAGE (cont.) DIALING STORED AUTODIAL OR AUTO INTERCOM NUMBERS 1 . Pick up the handset. 2 . Press the AUTODIAL STATION key or AUTO INTERCOM key of the number you want to speed dial. 3 . The SA-400 will automatically dial the number displayed. 4 . To hang up, return the handset to the cradle. STORING A SCRATCH PAD NUMBER While on-hook or off-hook, the scratch pad is a location where you can temporarily store a number. The number you enter into the scratch pad will remain there until another number is entered. To store a number in scratch pad memory. 1 . Press SCRATCH PAD . "SCRATCH PAD" will appear in the display. 2 . Enter the number you want to temporarily store in this location, using the keypad. 3 . Press SCRATCH PAD again. The unit will beep to indicate the number entered has been saved and the LCD will return to the standby display. DIALING A SCRATCH PAD NUMBER To dial a number stored in the scratch pad memory, 1 . Lift the handset. 2 . Press . SCRATCH PAD 3 . Press DIAL . 4 . The number will automatically be dialed. DISPLAY AND DIAL NUMBER To display a number prior to dialing the number, 1 . Use the keypad to dial a number. 2 . The telephone number will appear in the display as it is entered. 3 . Lift the handset. 4 . Press DIAL to dial the displayed number. 30 31