Casio XJ-A240 User Guide - Page 21
Turning Off the Projector
View all Casio XJ-A240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Ready Turning Off the Projector Caution The projector may remain quite hot for a while after you turn it off. Take care when moving the projector or otherwise handling it after use. See "Precaution when Handling the Projector after Use" (page E-8) for more information. Make sure that the projector is cooled down sufficiently before storing it. To turn off the projector 1. Press the [P] (Power) key. This causes the confirmation message "Do you want to turn off the projector?" to appear in the center of the projection screen. If you do not turn off the projector the confirmation message will disappear automatically after about 10 seconds. The confirmation message will also disappear if you press the [ESC] key. 2. To turn off the projector, press the [P] (Power) key again in response to the confirmation message. This causes the projector lamp to go out and stops projection. 3. After checking to make sure that the POWER/STANDBY indicator has stopped flashing amber and remains lit, unplug the AC power cord from the power outlet. This causes the POWER/STANDBY indicator to go out. 4. After ensuring that the projector and the connected computer or video device are turned off, disconnect the connecting cables from the projector and the connected device. 5. Close the lens cover. NOTE The power cord can be unplugged from the power outlet without first pressing the [P] (Power) key to turn off the projector (Direct Power Off). Note that zoom memory is disabled if you turn off power using Direct Power Off. For details about zoom memory, see the User's Guide on the CD-ROM that comes with the projector. The projector turns off automatically after a certain amount of time of key operation and input signal inactivity (Auto Power Off). The Auto Power Off trigger time can be specified on the setup menu. The initial default setting is 10 minutes. E-20