Casio XJ-A240 User Guide - Page 26
Projector Troubleshooting
View all Casio XJ-A240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English Troubleshooting Projector Troubleshooting Check the following items whenever you experience any problem with the projector. Problem Cause and Recommended Action The projector does not turn on when I press the [P] (Power) key. If the POWER/STANDBY indicator is not lit, the AC power cord may not be connected correctly. ➔ Make sure the AC power cord is connected correctly to the projector and the power outlet (see "Turning On the Projector"). If the TEMP or LAMP indicator remains flashing or lit, it means some type of error has occurred. ➔ See "Error Indicators and Warning Messages". The projector does not project any image from the connected device. The connected computer or video device may not be turned on, or it may not be outputting a video signal. ➔ Make sure the connected computer or video device is turned on, and perform the required operation on it to output a video signal. The correct input source is not selected on the projector. ➔ On the projector, select the input source that corresponds to the device whose image you are trying to project (see "Selecting the Input Source"). The projector does not Images may not project correctly when you have the correctly project the component output terminal of a video device connected to image from the the COMPUTER terminal of the projector. connected video device. ➔ Try using the projector's AV terminal (see "Connecting to a Standard Video Device"). When RGB/Component is selected as the input source, the color of the projected image or the image itself is abnormal. The wrong option ("Component" or "RGB") may be selected for the "Input Settings COMPUTER Terminal" setting on the setup menu. The image will not be projected correctly if "Component" is selected while the projector's COMPUTER terminal is connected to the RGB output terminal of a computer, or if "RGB" is selected while the projector's COMPUTER terminal is connected to the component video output terminal of a video device. ➔ Use the setup menu to change the "Input Settings COMPUTER Terminal" setting to "Auto" to correct the problem. I can't understand messages or menus because they are the wrong language. Perform the following operation to select the language you want. 1. Press the [MENU] key to display the setup menu. 2. Press [] five times and then press the [ENTER] key. 3. Display the language selection menu. If the input signal is RGB, press [] six times and then press the [ENTER] key. If the input signal is not RGB, press [] five times and then press the [ENTER] key. 4. Use the [] and [] keys to move the highlighting to the language you want to select and then press the [ENTER] key. 5. Press the [MENU] key to exit the setup menu. See page E-18 User's Guide (UsersGuide_ English.pdf) - page E-21 page E-17 User's Guide (UsersGuide_ English.pdf) User's Guide (UsersGuide_ English.pdf) E-25