Cisco 7911G Administration Guide - Page 112
SIP Configuration Menu (SIP Phones Only), SIP General Configuration Menu
UPC - 882658036361
View all Cisco 7911G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone SIP Configuration Menu (SIP Phones Only) The SIP Configuration menu is available on SIP phones. This menu contains the following sub-menus: • SIP General Configuration Menu, page 4-18 • Line Settings Menu, page 4-20 SIP General Configuration Menu The SIP General Configuration menu displays information about the configurable SIP parameters on the phone. Table 4-5 describes the options in this menu. Table 4-5 SIP General Configuration Menu Options Option Preferred CODEC Out of Band DTMF Register with Proxy Register Expires Phone Label Description To Change Displays the CODEC to use when a call Display only-cannot configure. is initiated. Displays the configuration of the out-of-band signaling (for tone detection on the IP side of a gateway). The Cisco Unified IP Phone (SIP) supports out-of-band signaling using the AVT tone method. Valid values are none, avt, and avt_always. Display only-cannot configure. Displays if the phone must register with Display only-cannot configure. a proxy server during initialization. Displays the amount of time, in seconds, after which a registration request expires. From Cisco Unified Communications Manager Administration, choose > Device > Device Settings > SIP Profile. Displays the text that is displayed on the top right status line of the LCD on the phone. This text is for end-user display only and has no effect on caller identification or messaging. Display only-cannot configure. 4-18 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 OL11954-01