Cisco 7971G-GE Administration Guide - Page 37
Settings > Network Configuration>, IPv4 Configuration, Settings > Network
![]() |
UPC - 746320966588
View all Cisco 7971G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 1 An Overview of the Cisco Unified IP Phone Installing Cisco Unified IP Phones Table 1-7 Checklist for Installing the Cisco Unified IP Phone 7970 Series (continued) Task Purpose For More Information 5. When you are configuring the network settings on the See the "Configuring Startup Network Settings" section phone, you can set up an IP address for the phone by on page 3-11. either using DHCP or manually entering an IP address. See the "Network Configuration Menu" section on Using DHCP-To enable DHCP and allow the DHCP page 4-5. server to automatically assign an IP address to the Cisco Unified IP Phone and direct the phone to a TFTP server, choose Settings > Network Configuration> IPv4 Configuration and: • To enable DHCP, set DHCP Enabled to Yes. DHCP is enabled by default. • To use an alternate TFTP server, set Alternate TFTP Server to Yes, and enter the IP address for the TFTP Server. Note Consult with the network administrator if you need to assign an alternative TFTP server instead of using the TFTP server assigned by DHCP. Without DHCP-You must configure the IP address, subnet mask, TFTP server, and default router locally on the phone, choose Settings > Network Configuration> IPv4 Configuration: To disable DHCP and manually set an IP address: a. To disable DHCP, set DHCP Enabled to No. b. Enter the static IP address for phone. c. Enter the subnet mask. d. Enter the default router IP addresses. e. Set Alternate TFTP Server to Yes, and enter the IP address for TFTP Server 1. You must also enter the domain name where the phone resides by Choosing Settings > Network Configuration. 6. Set up security on the phone. See the "Configuring Security on the Cisco Unified IP Provides protection against data tampering threats and Phone" section on page 3-12. identity theft of phones. 7. Make calls with the Cisco Unified IP Phone. Refer to Cisco Unified IP Phone 7970 Series Guide. Verifies that the phone and features work correctly. 8. Provide information to end users about how to use See Appendix A, "Providing Information to Users Via a their phones and how to configure their phone options. Website." Ensures that users have adequate information to successfully use their Cisco Unified IP Phones. OL-15299-01 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0 1-23
![](/manual_guide/products/cisco-7971gge-administration-guide-f7f97bc/37.png)