Cisco 7971G-GE Administration Guide - Page 74
See the Subnet Mask and Default Router options, IP address of the Dynamic Host Configuration
UPC - 746320966588
View all Cisco 7971G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Network Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-3 IPv4 Configuration Menu Options Option DHCP Server IP Address Subnet Mask Default Router 1 Default Router 2 Default Router 3 Default Router 4 Default Router 5 DNS Server 1 DNS Server 2 DNS Server 3 DNS Server 4 DNS Server 5 DHCP Description To Change IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone obtains its IP address. Display only-Cannot configure. Internet Protocol (IP) address of the phone. 1. Unlock network configuration options. If you assign an IP address with this option, you must also assign a subnet mask and default router. See the Subnet Mask and Default Router options in this table. 2. Set the DHCP Enabled option to No. 3. Scroll to the IP Address option, press the Edit softkey, and then enter a new IP Address. 4. Press the Validate softkey and then press the Save softkey. Subnet mask used by the phone. 1. Unlock network configuration options. 2. Set the DHCP Enabled option to No. 3. Scroll to the Subnet Mask option, press the Edit softkey, and then enter a new subnet mask. 4. Press the Validate softkey and then press the Save softkey. Default router used by the phone (Default Router 1) and optional backup routers (Default Router 2-5). 1. Unlock network configuration options. 2. Set the DHCP Enabled option to No. 3. Scroll to the appropriate Default Router option, press the Edit softkey, and then enter a new router IP address. 4. Press the Validate softkey. 5. Repeat Steps 3 and 4 as needed to assign backup routers. 6. Press the Save softkey. Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS servers (DNS Server 2-5) used by the phone. 1. Unlock network configuration options. 2. Set the DHCP Enabled option to No. 3. Scroll to the appropriate DNS Server option, press the Edit softkey, and then enter a new DNS server IP address. 4. Press the Validate softkey. 5. Repeat Steps 3 and 4 as needed to assign backup DNS servers. 6. Press the Save softkey. Indicates whether the phone has DHCP enabled or disabled. When DHCP is enabled, the DHCP server assigns the phone an address. When DHCP is disabled, the administrator must manually assign an IP address to the phone. 1. Unlock network configuration options. 2. Scroll to the DHCP Enabled option and press the No softkey to disable DHCP, or press the Yes softkey to enable DHCP. 3. Press the Save softkey. Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0 4-8 OL-15299-01