Cisco C7200-I User Guide - Page 1
Cisco C7200-I - Input/Output Controller - Control Processor Manual
UPC - 746320365398
View all Cisco C7200-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers This feature module describes the two new variants of the Cisco 7200 I/O card. The Cisco 7200-I/O-GE+E provides one Gigabit Ethernet port and one Ethernet port. The Cisco 7200-I/O-2FE/E provides two autosensing Fast Ethernet 10/100 Mb ports. This document includes the following sections: • Feature Overview • Supported Platforms • Supported Standards, MIBs, and RFCs • Configuration Tasks • Monitoring and Maintaining the Cisco 7200-I/O GE+E and Cisco 7200-2FE/E • Configuration Examples • Command Reference Feature Overview The Cisco 7200-I/O-GE+E is an Input/Output controller that provides one Gigabit Ethernet and one Ethernet port. It is equipped with a GBIC receptacle for 1000 megabits per second (Mbps) operation and an RJ-45 receptacle for 10 Mbps operation. The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation. I/O controllers support the following features: • Dual EIA/TIA-232 channels for local console and auxiliary ports • NVRAM for storing the system configuration and environmental monitoring logs • Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS software image • Flash memory for storing the boot helper image • Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis 12.1(5)T and 12.2(14) S 1