Cisco C7200-I User Guide - Page 11

Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers show controllers gigabitethernet show controllers gigabitethernet To display initialization block information, transmit ring, receive ring, and errors for the interface controllers about the Gigabit Ethernet interface of the Cisco 7200-I/O-GE+E, use the show controllers gigabitethernet privileged EXEC command. show controllers gigabitethernet slot/port Syntax Description slot port Slot number on the interface. Port number on the interface. Defaults No default behavior or values. Command Modes Privileged EXEC Command History Release 11.1 CC 12.1(3a)E 12.1(5)T 12.2(14)S Modification This command was introduced. Support for the Cisco 7200-I/O-GE+E controller was introduced. This command was integrated into Cisco IOS Release 12.1(5)T. This command was integrated into Cisco IOS Release 12.2(14)S. Usage Guidelines This command is used on the Cisco 7200-I/O-GE+E to display hardware and software information about the Gigabit Ethernet interface.The I/O controller is always found in slot 0. 12.1(5)T and 12.2(14) S 11