Cisco RV016 User Guide - Page 13
Installation - 16 port
UPC - 745883556717
View all Cisco RV016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 3 3. Connect your cable or DSL modem's Ethernet cable to one of the Router's Internet ports. Repeat this step to connect additional Internet devices to the Router's other Internet ports. Connect to Internet Port 1 4. If you are using the DMZ port, then connect an Ethernet cable to the DMZ port. Connect the other end to an appropriate network device, such as a public server. Connect to DMZ Port 5. Power on the cable or DSL modem(s). If you have a network device connected to the DMZ port, power on that network device. 6. Connect the included power cord to the Router's Power port, and then plug the power cord into an electrical outlet. Connect the Power 7. The System LED on the front panel will light up as soon as the power adapter is connected properly. 8. Power on your computers and other network devices. 10/100 16-Port VPN Router Installation 6