Cisco SGE2000P Administration Guide - Page 38
Console Configuration, Overview, Configuring the HyperTerminal Application - vlan
UPC - 745883572137
View all Cisco SGE2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter Console Configuration Overview The Ethernet switch features a menu-based console interface for basic configuration of the Ethernet switch and management of your network. The Ethernet switch can be configured using a menu-based interface through the console port or through a telnet connection. This chapter describes console interface configuration. Configuration can also be performed through the web utility, which is covered in the next chapter. NOTE: The Ethernet switch is setup by default to obtain its IP address via DHCP on the default VLAN 100. Configuring the HyperTerminal Application Before you use the console interface, you will need to configure the HyperTerminal application on your PC. 1. Click the Start button. 2. Select Programs and choose Accessories. Select Communications. 3. Select HyperTerminal from the options listed in this menu. 4. On the Connection Description screen, enter a name for this connection. In the example, the name of connection is Linksys One. 5. Select an icon for the application. Then, click the OK button. Linksys One Ready Communications Solution 4 33 Chapter 4: Console Configuration Overview