Cisco SGE2000P Administration Guide - Page 55
Web Utility Configuration, Overview, Accessing the Web-based Utility, Viewing Online Help - default ip address
UPC - 745883572137
View all Cisco SGE2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter Linksys One Ready Communications Solution 5 Web Utility Configuration Overview The Linksys Switch provides a complete web-based utility to configure the Ethernet switch. This utility is accessible through your web browser. Use the navigation window, located on the left side of the web-based utility, to view various functions of the Ethernet switch. NOTE: The Ethernet switch is setup by default to obtain its IP address via DHCP on the default VLAN 100. Accessing the Web-based Utility To access the web-based utility, enter the IP address of the Ethernet switch to the address field of your web browser. For example: type http://192.168.100.20 or https://192.168.100.20 if the IP address of the Ethernet switch is 192.168.100.20. The IP address of the Ethernet switch is determined by DHCP, so you'll need to find its address using the Console configuration or the Linksys One Administrator screen. Linksys One Portal If your Ethernet switch is part of a Linksys One system, the easiest way to manage it is with the Linksys One Portal - available only on the Linksys One Services Router. Refer to the Customer Premises Equipment Administration Guide for more details on the Linksys One Portal. Viewing Online Help The Web Utility has complete online help functionality for each screen. To access on-line help for a particular screen, click on the Help button located on the right side of the screen. Chapter 5: Web Utility Configuration 50 Overview