Cisco SGE2000P Administration Guide - Page 8

Chapter Getting to Know the Switch Overview The SGE2000 and SGE2000P models are 24-port, layer-2 Ethernet switches that expand the capability of the Linksys system. These two versions are functionally identical except the SGE2000P model offers Power-over-Ethernet (PoE) which can be used to supply power to various Linksys products over Ethernet cable. The Front Panel The Switch's LEDs and Ethernet ports are located on the front panel. 1 2 3 4 5 Front Panel LEDs The Switch uses Light Emitting Diodes (LEDs) to indicate the status of numerous functions. These functions are listed below. Linksys One Ready Communications Solution 2 System Status LEDs. Four LEDs indicate the status 1 of the Ethernet switch power, fan, RPS connectivity, and stack master. For more details, refer to "System Status LEDs," on page 4. LAN Ports. Twenty four 10/100/1000 BaseT LAN 2 ports provide connectivity to other Linksys devices. For more details, refer to "LAN Ports," on page 5. Gigabit Interface Converter (mini-GBIC) Uplink Ports. Four mini-GBIC ports provide uplink ports 3 which support network speeds of 10Mbps, 100Mbps, and 1000Mbps. For more details, refer to "Uplink Ports," on page 6. Stack ID. If stacking is active, indicates the ID 4 number of the stack. For more details, refer to "Stack ID LEDs," on page 4. RESET Switch. Resets the SGE2000/SGE2000P 5 Ethernet switch. For more details, refer to "Reset Switch," on page 5. 3 Chapter 2: Getting to Know the Switch Overview