Cisco SGE2000P Administration Guide - Page 51
Active Image, Upgrade / Backup
UPC - 745883572137
View all Cisco SGE2000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter Linksys One Ready Communications Solution 4 Select Edit to make changes. When your changes are complete, press the Esc key to return to the Action menu, and select Save to save your changes. File Management The File Management screen allows you to upload or download files, such as the startup configuration, boot, or image file, using a TFTP server. NOTE: There are two software images on the Ethernet switch: Image 1 and Image 2. When you copy an image to the switch via TFTP, the inactive image is replaced. When you copy an image to the switch via the console port, the active image is replaced. Upgrade / Backup Select Edit to change the settings. Specify the source and destination of the file, the file name, and the IP address of the file server where the upgrade file is being downloaded, When your changes are complete, press the Esc key to return to the Action menu, and select Execute to upload or download the designated file. Active Image The Active Image screen shows information about the active image file and the image file that will be active after reboot. Chapter 4: Console Configuration 46 Configuring the Switch through the Console or Telnet Interface