Cisco VG224 Quick Start Guide - Page 8

95915 Note Screws are included for attaching the brackets to the chassis, but not for installing the chassis in a rack or on a wall. You need four additional machine screws to install the chassis in a rack. Use the screw size required by your rack. Figure 5 19-Inch Rack-Mounting with Front Panel Forward CISCO VG224 Figure 6 19-Inch Rack-Mounting with Rear Panel Forward VG224-24FXS Figure 7 Telco 19-Inch Rack-Mounting with Rear Panel Forward 95916 95917 VG224-24FXS Step 2 Install the chassis in the rack. Wall-Mounting the Chassis The following warning applies only when the unit is wall-mounted: Warning This unit is intended to be mounted on a wall. Please read the wall mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 248 Caution You can wall-mount the unit with either the right or left side facing up; however, the front and rear panels must be vertical. 8