Cisco WS-C3560E48PDSF-RF Hardware Installation Guide - Page 103
C-1, Stripping the Ground Wire
UPC - 882658132667
View all Cisco WS-C3560E48PDSF-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Appendix C Connecting to DC Power Figure C-1 Stripping the Ground Wire 0.5 in. (12.7 mm) ± 0.02 in. (0.5 mm) Connecting to DC Power 60528 Insulation Wire lead Step 3 Slide the open end of the ground lug over the exposed area of the 6-gauge wire. Step 4 Using a Panduit crimping tool, crimp the ground lug to the 6-gauge wire, as shown in Figure C-2. Figure C-2 Crimping the Ground Lug 60529 Step 5 Step 6 Use the two number-10-32 screws to attach the ground lug and wire assembly to the switch rear panel ground connector, as shown in Figure C-3. If you are using an RPS, connect the ground lug as shown in Figure C-4. Using a ratcheting torque screwdriver, torque each ground-lug screw to 15 lbf-in. (240 ozf-in.) OL-6337-07 Catalyst 3560 Switch Hardware Installation Guide C-3