Cisco WS-C3560E48PDSF-RF Hardware Installation Guide - Page 67
Mounting the Switch Under a Desk or Shelf
UPC - 882658132667
View all Cisco WS-C3560E48PDSF-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 3 Switch Installation (8- and 12-Port Switches) Installing the Switch Step 7 Place the switch onto the mounting screws and slide the switch forward until it locks in place, as shown in Figure 3-4. Figure 3-4 Mounting the Switch Under a Desk or Shelf 1 4 2 1 6x 7x 8x Catalyst 3560 SERIES PoE-8 5x 4x SPD 3x SYST STAT DPLX 1x 2x CONSOLE SYST 3 1 Desk or shelf 3 Slides on this way 2 Screws 4 Wall After the switch is mounted on or under the desk or shelf: 1. (Optional) Secure the AC power cord. See "Securing the AC Power Cord" section on page 3-19. 2. Power on the switch. See the "Verifying Switch Operation" section on page 3-7. 3. Connect to a 10/100 or 10/100/1000 port, and run Express Setup. See the Catalyst 3560 Switch Getting Started Guide for instructions. To use the CLI setup program, see Appendix D, "Configuring the Switch with the CLI-Based Setup Program." 4. Connect to the front-panel ports. OL-6337-07 Catalyst 3560 Switch Hardware Installation Guide 3-11