Cisco WS-C3560E48PDSF-RF Hardware Installation Guide - Page 97
Two Twisted-Pair Cable Pinouts, SFP Module, Wavelength, nanometers, Fiber Type, Core Size/Cladding
UPC - 882658132667
View all Cisco WS-C3560E48PDSF-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Appendix B Connector and Cable Specifications Cable and Adapter Specifications Table B-1 Fiber-Optic SFP Module Port Cabling Specifications (continued) SFP Module CWDM Wavelength (nanometers) 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Fiber Type SMF Core Size/Cladding Modal Bandwidth Size (micron) (MHz/km)1 Cable Distance G.6522 - 62 miles (100 km) DWDM ITU channels - - 21-59 - - 1. Modal bandwidth applies only to multimode fiber. 2. A mode-field diameter/cladding diameter = 9 micrometers/125 micrometers 3. A mode-conditioning patch cord is required. Using an ordinary patch cord with MMF, 1000BASE-LX/LH SFP modules, and a short link distance can cause transceiver saturation, resulting in an elevated bit error rate (BER). When using the LX/LH SFP module with 62.5-micron diameter MMF, you must also install a mode-conditioning patch cord between the SFP module and the MMF cable on both the sending and receiving ends of the link. The mode-conditioning patch cord is required for link distances greater than 984 feet (300 m). 4. 1000BASE-ZX SFP modules can send data up to 62 miles (100 km) by using dispersion-shifted SMF or low-attenuation SMF; the distance depends on the fiber quality, the number of splices, and the connectors. Two Twisted-Pair Cable Pinouts Figure B-6 and Figure B-7 show the schematics of two twisted-pair cables for connecting to 10BASE-Tand 100BASE-TX-compatible devices. Figure B-6 Switch 3 TD+ 6 TD- 1 RD+ 2 RD- Two Twisted-Pair Straight-Through Cable Schematic Router or PC 3 RD+ 6 RD- 1 TD+ 2 TD- H5578 Figure B-7 Switch 3 TD+ 6 TD- 1 RD+ 2 RD- Two Twisted-Pair Crossover Cable Schematic Switch 3 TD+ 6 TD- 1 RD+ 2 RD- H5579 OL-6337-07 Catalyst 3560 Switch Hardware Installation Guide B-5