Clifford Matrix RS III Owners Guide - Page 17
Command Alarm Recognition Mode
View all Clifford Matrix RS III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Command Page When a command (arm/disarm, remote start, or auxiliary channel) from the remote control is sent and received, the system will send a command page back to confirm receipt. note: When the system is in Valet mode, the remote control will show the lock (5) and unlock (6) icons, but will not generate a command page. Alarm Page If the alarm system is triggered while armed, an Alarm Page will be sent to the remote control. After receipt of an Alarm Page, the LCD icons will display the alarm system status information and the remote control will generate Alarm Page alerts. An Alarm Page alert is a single beep or vibration from the remote control every 60 seconds to alert the user that the alarm system was triggered and will continue until the alarm page is cleared. note: If the transmiter is paged with an Alarm Page and the WarnAway® is triggered before the Alarm Page is recieved the transmitter will report the WarnAway® only until the system is disarmed. Page Recognition Mode The remote control will leave a zone icon illuminated when it has received a triggered response and will wait for you to recognize the violation. Press any button on the remote control, the LCD information and Alarm Page alerts will be cleared. note: The remote control buttons will not send a command to the system until the alarm page is cleared. 14 © 2002 directed electronics, inc.