Clifford Matrix RS III Owners Guide - Page 30
and it will go out if you are exiting Valet Mode. The remote
View all Clifford Matrix RS III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
To enter or exit Valet Mode: 1. Turn the ignition on. 2. Turn the ignition off. 3. Press and release the Valet DRW-35 switch within 10 seconds. The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting Valet Mode. The remote will not generate a Page Notification when entering or exiting Valet mode using the Valet switch. To enter or exit Valet Mode using the transmitter: 1. Open any vehicle door. 2. Press . 3. Press . 4. Press again. The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting Valet Mode. The remote control will generate alarm/disarm Page Notifications since the observing buttons are used when entering and exiting valet mode. The status LED is the only way to ensure the system has entered/exited valet mode. © 2002 directed electronics, inc. 27