Clifford Matrix RS III Owners Guide - Page 35
exited. If the vehicle has already been remote started,
View all Clifford Matrix RS III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
To exit Timer Mode: Timer Mode can be exited by turning the ignition on with the key any time that the vehicle engine is not running. You can also exit Timer Mode using the transmitter by following these steps: 1. Start the engine by pressing and on the remote control simultaneously. 2. Press and release on the remote control. 3. Within two seconds, press and release and on the remote control again. 4. The vehicle engine will shut down and the parking lights will flash four times to confirm that Timer Mode has been exited. If the vehicle has already been remote started, you may skip Step One. 5. The remote control will generate normal remote start and shutdown Page Notifications when entering/exiting timer mode and during programmed start times only when remotely activated. When exiting timer mode with the ignition, no page notification will be generated. 32 © 2002 directed electronics, inc.