Clifford Matrix RS III Owners Guide - Page 25

Disarming while driving Press on the remote control or simply turn off the ignition to disarm the system. The lights will flash twice, the doors will unlock, the siren will chirp twice, and the status LED will turn off. The remote control will beep twice (or vibrate). The disarm (8) icon will flash for three seconds and the disarm status icon (6) will be displayed on the LCD. note: If the remote control received a Warn Away® or Triggered Response Page while armed, the first press of the unlock button will clear the page alert. A second press will turn the siren off, and a third press will disarm the system. ➜ multi-level security arming Multi-Level Security Arming allows you to select which of the system's inputs or sensors will be active and which will be bypassed when the system is armed. (See Table of Zones section of this guide.) Pressing (only in Standard Configuration) again within five seconds of arming the system will activate the MultiLevel Security feature. Each press of will select a different security level, and the remote will beep or vibrate once and the arm icon (7) will flash on the LCD. The system will respond as follows. ➤ Press once: The siren chirps once and the system is armed. ➤ Press a second time within five seconds: The siren chirps twice followed by a long chirp. Zone 2 is now bypassed. ➤ Press a third time within five seconds: The siren chirps three times followed by a long chirp. Zone 4 is now bypassed. 22 © 2002 directed electronics, inc.