Clifford Matrix RS III Owners Guide - Page 23

➜ triggered response description A Triggered Response can be activated by any of the triggers listed below and consists of an alarm page along with the response described for each trigger. The default Triggered Response duration is 30 seconds but can be programmed from 1-180 seconds by your installer with the Directed Bitwriter. ➤ Sensor Trigger - Heavy impacts to the vehicle will instantly sound the siren and flash the lights for the programmed duration and report Zone 2. ➤ Door Trigger - If a door is opened the siren will chirp for three seconds, then the siren will sound and the lights will flash for the programmed duration and report Zone 3. The three seconds allow the user time to disarm the system with a minimum of noise should a door be opened inadvertently while the system is armed. ➤ Hood Trigger - Opening the hood will sound the siren, flash the lights for the programmed duration, and report Zone 6. ➤ Trunk Trigger - Opening the trunk (if connected) will instantly sound the siren and flash the lights for the programmed duration and report Zone 1. ➤ Ignition Trigger - If the ignition is turned on the siren will chirp for three seconds, then the siren will sound and the lights will flash for the programmed duration and report Zone 5. When a Triggered Response is activated the remote control will: ➤ Repeat four quick beeps (or vibrate) for 15 seconds. ➤ The siren icon (11) will turn on for 15 seconds ➤ The alarm (12) and zone icons will turn on and remain on 20 © 2002 directed electronics, inc.