Coby DVD938 User Manual - Page 18
Composite Video Out (Standard), Component Video Out (Best), Cb/Pb
UPC - 716829999387
View all Coby DVD938 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English Connections Composite Video Out (Standard) Using the supplied AV cable: 1. Connect one end of the yellow cable to the yellow Video Out jack of the unit. 2. Connect the other end of the yellow cable to the yellow Video In jack of a TV. Press on the remote until you see "CVBS" on the TV screen to set the unit to the composite video mode. The maximum output resolution for the composite video connection is 480i. Component Video Out (Best) Using an optional component video cable: 1. Connect one end of the green, blue and red cables to the Y, Cb/Pb, and Cr/Pr Component Video Out jacks of the unit, respectively. 2. Connect the other end of the green, blue and red cables to the Y, Cb/Pb, and Cr/Pr Component Video In jacks of a TV, respectively. You must set the unit's video output to either YUV or P-YUV when using the component video output. Use YUV for 480i output; use P-YUV for 480p output. See the Setup section of this manual for more information. You may also press on the remote until you see "YUV" or "P-YUV" on the TV screen to set the unit to the component video mode. The maximum output resolution for the component video connection is 480p. Page 18 Coby Electronics Corporation