Compaq AP200 Reference Guide - Page 36
Using Computer Checkup (TEST) or View System Information (INSPECT)
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2-11 Using Computer Checkup (TEST) or View System Information (INSPECT) NOTE: Before you run Computer Checkup (TEST) or View System Information (INSPECT), you must create a diagnostics diskette. Refer to the section "Creating a Diagnostics Diskette" in this chapter for instructions. 1. Restart your workstation from the diagnostics diskette you have created. 2. Press Enter to bypass the welcome screen. 3. Select either Computer Checkup (TEST) or View System Information (INSPECT). When running TEST: 1. Select the option to view the device list. A list of the installed hardware devices appears. 2. Verify that TEST correctly detected the devices installed. This utility will detect all devices manufactured by Compaq; devices from other manufacturers may not be detected. t If the list is correct, select OK and go on to step 3. t If the list is incorrect, be sure that any new devices are installed properly. If you do find an installation problem, call your Compaq authorized dealer, reseller, or service provider. 3. Select one of the following from the test option menu: t Quick Check Diagnostics-This option runs a quick, general test on each device with a minimal number of prompts. If errors occur, they are displayed when the testing is complete. t Automatic Diagnostics-This option runs unattended, maximum testing of each device with minimal prompts. You can choose how many times to run the tests, to stop on errors, or to print or file a log of errors. t Prompted Diagnostics-This option allows maximum control over the device testing process. You can choose attended or unattended testing, decide to stop on errors, or choose to print or file a log of errors. Compaq Professional Workstation AP200 Reference Guide