Compaq Armada e500 Compaq Armada E500 and Armada V300 Maintenance and Service - Page 127
base enclosure.
View all Compaq Armada e500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
4. Turn the computer top side up with the rear panel facing forward. 5. Remove the two bushing guides 1 that secure the system board to the I/O bracket (Figure 5-25). 6. Remove the three screws 2 that secure the system board to the base enclosure. 7. Lift the system board straight out of the base enclosure 3. Figure 5-25. Removing the System Board Reverse the removal procedure described above to replace the system board. Removal and Replacement Procedures 5-33
Removal and Replacement Procedures
5-33
4.
Turn the computer top side up with the rear panel facing forward.
5.
Remove the two bushing guides
1
that secure the system board to
the I/O bracket (Figure 5-25).
6.
Remove the three screws
2
that secure the system board to the
base enclosure.
7.
Lift the system board straight out of the base enclosure
3
.
Figure 5-25.
Removing the System Board
Reverse the removal procedure described above to replace the
system board.