Compaq Evo D510 Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family
Compaq Evo D510 - Convertible Minitower Manual
View all Compaq Evo D510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq Evo D510 manual content summary:
- Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 1
b Computer Setup (F10) Utility Guide Evo Desktop Family Evo Workstation Family Document Part Number: 215867-004 May 2002 This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 2
Compaq Computer Corporation Compaq, the Compaq logo, and Evo are trademarks of Compaq Information Technologies Group, L.P. Microsoft, MS-DOS, Windows, Windows 2000, Windows XP Professional and Windows ) Utility Guide Evo Desktop Family Evo Workstation Family Fourth Edition May 2002 Document Part Number - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 3
Contents Computer Setup (F10) Utility Guide Computer Setup (F10) Utilities 1 Using Computer Setup Utilities 3 File 4 System Information 4 About 4 Set 5 Options 7 IDE DPS Self-Test 8 Controller Order 9 SCSI Narrow Termination 10 Boot Order 10 Security 11 Setup Password 11 Power- - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 4
Contents Network Service Boot 16 System IDs 16 Power 17 Energy Saver 17 Timeouts 17 Energy Saver Options 17 Advanced 18 Power-On Options 18 Onboard Devices 21 PCI Devices 21 Bus Options 21 Device Options 22 PCI VGA Configuration 23 iv Computer Setup (F10) Utility Guide - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 5
for processor, graphics, memory, audio, storage, communications, and input devices. ■ Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or LS-120 drives. ■ Configure the boot priority of IDE and SCSI hard drives controllers. ■ Configure Quiet Drive - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 6
during system restarts (warm boots) as well as during power-on. ■ Establish a setup password that controls access to Computer Setup (F10) Utility and the settings described in this section. ■ To secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded NIC - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 7
Guide Using Computer Setup Utilities To access the Computer Setup Utilities menu, complete the following steps: 1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart the Computer. 2. When the F10 = Setup message is displayed changes, select File > Save Changes - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 8
Computer Setup (F10) Utility Guide Computer Setup Heading Option Description File System Information Lists: • Product name • Processor type/speed/stepping • Cache size (L1/L2) • Installed memory size • System ROM (includes family name and version) • Chassis serial number • Asset - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 9
and options are displayed. The following options may be presented: Diskette Type Identifies the highest capacity media type accepted by the diskette drive. Legacy Diskette Drives Options are 3.5" 1.44 MB, 5.25" 1.2 MB, and Not Installed. Save/Restore for Disk on Key is supported. Drive Emulation - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 10
Guide capabilities) are PIO 0, Max PIO, Enhanced DMA, Ultra DMA 0, and Max UDMA. Translation Mode (IDE disks to be used for the device. This enables the BIOS to access disks partitioned and formatted on other systems and disk will be inaccessible. Support for Computer Setup options may vary - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 11
will not operate at maximum performance. ✎ If the drive does not support Quiet mode, the Quiet Drive option will not be displayed. Options Removable Media Boot Enables/disables ability to boot the system from removable media. Support for Computer Setup options may vary depending on your specific - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 12
then on, manually. Primary IDE Controller Allows you to enable or disable the primary IDE controller. Secondary IDE Controller Allows you to enable or disable the secondary IDE controller. Diskette MBR Validation Allows you to enable or disable strict validation of the diskette Master Boot Record - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 13
Guide Computer Setup (Continued) Heading Option Description Storage (continued) Controller Order (This feature is supported on select models only.) Allows you to specify the order of attached hard drive controllers. The first hard drive controller in the order will have priority in the boot - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 14
the default device specified in Boot Order, restart the computer and press F9 when the F10 = Setup message appears on the screen. When POST is completed, a list of bootable devices is displayed. Use the arrow keys to select a device and press the Enter key. Support for Computer Setup options may - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 15
under Windows. Also, this password must be set in order to use some Compaq remote security tools. See the Troubleshooting Guide for more boot (CTRL+ALT+DEL). ✎ This selection is available only when Network Server Mode is disabled. See the Desktop Management Guide for more information. Support - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 16
removed. Setup Password requires that the setup password be entered to boot the computer if the sensor detects that the cover has been removed. This feature is supported on select models only. See the Desktop Management Guide for more information. Smart Sensor Allows you to: • Enable/disable the - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 17
during a subsequent cold-boot sequence. ✎ This selection will only appear when at least one drive that supports the DriveLock feature is attached to the system. This feature is supported on select models only. See the Desktop Management Guide for more information. Support for Computer Setup options - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 18
errors. If MBR Security is enabled and disk accesses are being serviced by the operating system, any MBR change will be detected by the BIOS during the next reboot, and an MBR Security warning message will be displayed. Support for Computer Setup options may vary depending on your specific hardware - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 19
Guide Computer Setup (Continued) Heading Option Description Security (continued) Save Master Boot Record Restore Master Boot Record Saves a backup copy of the Master Boot parallel port, USB ports, system audio, network controllers (some models), and SCSI controllers. Support for Computer - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 20
(F10) Utility Guide Computer Setup (Continued) Heading Option Description Security (continued) Network Service Boot Enables/disables the computer's ability to boot from an operating system installed on a network server. (Feature available on NIC models only; the network controller must reside - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 21
(F10) Utility Guide Computer Setup ( the ACPI-enabled operating systems. Timeouts Allows you to disable or manually select timeout values for the system and/or all attached IDE not apply under ACPI-enabled operating systems. Support for Computer Setup options may vary depending on your specific - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 22
Computer Setup (F10) Utility Guide Computer Setup (Continued) Heading display the text "F12 = Network Service Boot" during POST. Disabling this feature prevents the text from being displayed. However, pressing the F12 key will still force the system to attempt booting from the network. Support - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 23
will cause the system to display a message before loading options ROMs. (This feature is supported on select models only.) • Remote wakeup boot source (remote server/local hard drive). • UUID (Universal Unique Identifier) (enable/disable). Every Compaq computer has a unique identifier (serial - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 24
is freed up for use by option ROMs. The disadvantage is that a popular memory manager, HIMEM.SYS, does not work properly when USB buffers are at top of memory AND the system has 64 MB or less of RAM. Support for Computer Setup options may vary depending on your specific hardware configuration. 20 - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 25
palette snooping, which sets the VGA palette snooping bit in PCI configuration space; only needed when more than one graphics controller is installed. • PCI SERR# Generation. • ECC support allows hardware based error correction for ECC-capable memories. Support for Computer Setup options may vary - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 26
. This feature is supported on select models only. • ACPI S3 Video REPOST (enable/disable). This feature reruns the video option ROM on a boot from the S3 state. Support for Computer Setup options may vary depending on your specific hardware configuration. 22 Computer Setup (F10) Utility Guide - Compaq Evo D510 | Computer Setup (F10) Utility Guide, Compaq Evo Desktop Family - Page 27
Displayed only if there are multiple PCI video adapters in the system. Allows users to specify which VGA controller will be the "boot" or primary VGA controller. Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup (F10) Utility Guide
b
Computer Setup (F10) Utility Guide
Evo Desktop Family
Evo Workstation Family
Document Part Number: 215867-004
May 2002
This guide provides instructions on how to use Computer Setup. This
tool is used to reconfigure and modify computer default settings when
new hardware is installed and for maintenance purposes.