Compaq Evo n1000v Compaq Notebook Series, Evo N1000 and Presario 1500 Maintena - Page 110
Connector Cover
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Removal and Replacement Procedures 5.8 Connector Cover ✎ The connector cover is available with carbon finish for Evo Notebook N1000 models and silver finish for Presario 1500 models, and are included in the Miscellaneous Plastics/Hardware Kit, spare part number 285541-001. 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the rear panel facing forward. 3. Remove the two TM2.5 × 5.0 screws 1 that secure the connector cover to the base enclosure (Figure 5-15). 4. Open the connector cover 2. 5. Remove the connector cover from the base enclosure 3. Figure 5-15. Removing the Connector Cover Reverse the preceding procedures to install the connector cover. 5-18 Maintenance and Service Guide
5–18
Maintenance and Service Guide
Removal and Replacement Procedures
5.8 Connector Cover
✎
The connector cover is available with carbon finish for Evo
Notebook N1000 models and silver finish for Presario 1500
models, and are included in the Miscellaneous Plastics/Hardware
Kit, spare part number 285541-001.
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the two TM2.5 × 5.0 screws
1
that secure the
connector cover to the base enclosure (Figure 5-15).
4. Open the connector cover
2
.
5. Remove the connector cover from the base enclosure
3
.
Figure 5-15. Removing the Connector Cover
Reverse the preceding procedures to install the connector cover.