Compaq Evo n1000v Compaq Notebook Series, Evo N1000 and Presario 1500 Maintena - Page 148
Miscellaneous Plastics/Hardware Kit, spare part number
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Removal and Replacement Procedures 2. Remove the two TM2.5 × 5.0 screws 1 that secure the optical drive front alignment rail to the base enclosure (Figure 5-43). 3. Remove the front alignment rail 2 from the base enclosure. 4. Remove the two TM2.5 × 5.0 screws 3 that secure the optical drive rear alignment rail to the base enclosure. 5. Remove the rear alignment rail 4 from the base enclosure. Figure 5-43. Removing the Optical Drive Alignment Rails ✎ The optical drive alignment rails are included in the Miscellaneous Plastics/Hardware Kit, spare part number 285541-001. 5-56 Maintenance and Service Guide
5–56
Maintenance and Service Guide
Removal and Replacement Procedures
2.
Remove the two TM2.5 × 5.0 screws
1
that secure the optical
drive front alignment rail to the base enclosure (Figure 5-43).
3. Remove the front alignment rail
2
from the base enclosure.
4.
Remove the two TM2.5 × 5.0 screws
3
that secure the optical
drive rear alignment rail to the base enclosure.
5. Remove the rear alignment rail
4
from the base enclosure.
Figure 5-43. Removing the Optical Drive Alignment Rails
✎
The optical drive alignment rails are included in the
Miscellaneous Plastics/Hardware Kit, spare part number
285541-001.