Compaq Evo n1000v Compaq Notebook Series, Evo N1000 and Presario 1500 Maintena - Page 144
Removing the System Board-to-TouchButton, Board Cable, to which the system
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Removal and Replacement Procedures ✎ After the top cover is removed, the system board-to-TouchButton board cable can be removed. The system board-to-TouchButton board cable is included in the Miscellaneous Cable Kit, spare part number 285540-001. 10. Release the ZIF connector 1 to which the system board-to-TouchButton board cable is attached and disconnect the cable 2 from the system board (Figure 5-41). Figure 5-41. Removing the System Board-to-TouchButton Board Cable Reverse the preceding procedures to install the top cover. 5-52 Maintenance and Service Guide
5–52
Maintenance and Service Guide
Removal and Replacement Procedures
✎
After the top cover is removed, the system board-to-TouchButton
board cable can be removed. The system board-to-TouchButton
board cable is included in the Miscellaneous Cable Kit, spare part
number 285540-001.
10. Release the ZIF connector
1
to which the system
board-to-TouchButton board cable is attached and disconnect
the cable
2
from the system board (Figure 5-41).
Figure 5-41. Removing the System Board-to-TouchButton
Board Cable
Reverse the preceding procedures to install the top cover.