Compaq Evo n1000v Compaq Notebook Series, Evo N1000 and Presario 1500 Maintena - Page 135
Disconnecting the TouchPad-to-TouchButton, Board and TouchButton Board-to-Pointing Stick
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Removal and Replacement Procedures ✎ Dual Stick notebook models have a different TouchPad configuration. An additional cable, screw, and board must be removed. Steps 9 through 13 apply to Dual Stick models only. 9. Release the ZIF connector 1 on the pointing stick board to which the TouchButton board-to-pointing stick board cable is attached and disconnect the cable 2 (Figure 5-34). 10. Release the ZIF connector 3 on the TouchButton board to which the TouchButton board-to-pointing stick board cable is attached and disconnect the cable 4. 11. Disconnect both ends of the TouchPad-to-TouchButton board cable from the LIF connectors on the TouchButton board 5 and TouchPad 6. Figure 5-34. Disconnecting the TouchPad-to-TouchButton Board and TouchButton Board-to-Pointing Stick Board Cables Maintenance and Service Guide 5-43