Compaq Evo n1000v Compaq Notebook Series, Evo N1000 and Presario 1500 Maintena - Page 128
Removing the Palm Rest, Release the ZIF connector to which the system board
![]() |
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Removal and Replacement Procedures 8. Lift the front edge of the palm rest and swing it up and back 1 until it rests on the top cover (Figure 5-28). 9. Release the ZIF connector to which the diskette drive cable is attached 2 and disconnect the diskette drive cable 3 from the system board. 10. Release the ZIF connector to which the system boardto-TouchButton board cable is attached 4 and disconnect the cable 5 from the TouchButton board. Figure 5-28. Removing the Palm Rest 5-36 Maintenance and Service Guide
![](/manual_guide/products/compaq-1500ap-compaq-notebook-series-evo-n1000-presario-1500-maintenance-service-guide-c12fe51/128.png)
5–36
Maintenance and Service Guide
Removal and Replacement Procedures
8. Lift the front edge of the palm rest and swing it up and
back
1
until it rests on the top cover (Figure 5-28).
9. Release the ZIF connector to which the diskette drive cable
is attached
2
and disconnect the diskette drive cable
3
from
the system board.
10. Release the ZIF connector to which the system board-
to-TouchButton board cable is attached
4
and disconnect
the cable
5
from the TouchButton board.
Figure 5-28. Removing the Palm Rest