Compaq Evo n1000v Compaq Notebook Series, Evo N1000 and Presario 1500 Maintena - Page 115
Disconnecting the Keyboard-to-TouchPad Cable
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Removal and Replacement Procedures 4. Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board (Figure 5-19). ✎ Dual Stick notebook models have an additional cable that must be disconnected. Release the ZIF connector 3 to which the keyboard-to-TouchPad cable is attached and disconnect the cable 4 from the keyboard. Figure 5-19. Disconnecting the Keyboard-to-TouchPad Cable 5. Remove the keyboard. Reverse the preceding procedures to install the keyboard. Maintenance and Service Guide 5-23
Removal and Replacement Procedures
Maintenance and Service Guide
5–23
4. Release the ZIF connector
1
to which the keyboard cable is
connected and disconnect the keyboard cable
2
from the
system board (Figure 5-19).
✎
Dual Stick notebook models have an additional cable that must
be disconnected. Release the ZIF connector
3
to which the
keyboard-to-TouchPad cable is attached and disconnect the
cable
4
from the keyboard.
Figure 5-19. Disconnecting the Keyboard-to-TouchPad Cable
5. Remove the keyboard.
Reverse the preceding procedures to install the keyboard.