Compaq Evo n1000v Compaq Notebook Series, Evo N1000 and Presario 1500 Maintena - Page 122
Removing the Display Screws and, Disconnecting the Display Cables
![]() |
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Removal and Replacement Procedures 4. Remove the TM2.5 × 5.0 screw 1 that secures the display video ground cable to the heat spreader (Figure 5-23). 5. Disconnect the display video cable 2 from the system board. 6. Remove the display video cable from the routing channels in the heat spreader and the top cover 3. 7. Remove the TM2.5 × 5.0 screw 4 that secures the display inverter ground cable to the heat spreader. 8. Disconnect the display inverter cable 5 from the system board. Figure 5-23. Removing the Display Screws and Disconnecting the Display Cables 5-30 Maintenance and Service Guide
![](/manual_guide/products/compaq-1500ap-compaq-notebook-series-evo-n1000-presario-1500-maintenance-service-guide-c12fe51/122.png)
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
4. Remove the TM2.5 × 5.0 screw
1
that secures the display
video ground cable to the heat spreader (Figure 5-23).
5. Disconnect the display video cable
2
from the system board.
6. Remove the display video cable from the routing channels in
the heat spreader and the top cover
3
.
7. Remove the TM2.5 × 5.0 screw
4
that secures the display
inverter ground cable to the heat spreader.
8. Disconnect the display inverter cable
5
from the system
board.
Figure 5-23. Removing the Display Screws and
Disconnecting the Display Cables