Compaq ProLiant 1200 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 102
SCSI Tape Drive Test Error Codes, Server Manager/R Board Test Error Codes, Table 3-17
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
3-48 Diagnostic Tools SCSI Tape Drive Test Error Codes The 6700 series of Diagnostic error codes identifies failures with tape cartridge, tape drive, media changer, tape drive cabling, adapter board, or system board assembly. Corrective action may require replacement of the tape cartridge, tape drive, media changer, tape drive cabling, adapter board, or system board assembly. Table 3-17 SCSI Tape Drive Test Error Codes Error Code Description 6700-xx SCSI Tape ID drive types test failed. 6706-xx SCSI Disk SA/Media test failed. 6709-xx SCSI Disk Erase tape test failed. 6728-xx Media load/unload test failed. Recommended Action The following steps apply to error codes 6700-xx through 6799-xx: 1. Run the System Configuration Utility and verify the drive type. 2. Replace the SCSI Tape drive signal and power cables and retest. 3. Replace the SCSI controller and retest. 4. Replace the SCSI Tape drive and retest. 5. Replace the system board and retest. Server Manager/R Board Test Error Codes The 7000 series of Diagnostic error codes identifies failures with the Server Manager/R board. Corrective action may require replacement of the Server Manager/R board, the Integrated 2400-baud modem, voice ROM, or battery on the Server Manager/R board. Error Code Table 3-18 Server Manager/R Board Test Error Codes Description Recommended Action