Compaq ProLiant 1200 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 95
Tape Drive Test Error Codes, Table 3-12
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
3-41 Tape Drive Test Error Codes The 1900 series of Diagnostic error codes identifies failures with tape cartridge, tape drive, tape drive cabling, adapter board, or system board assembly. Corrective action may require replacement of the tape cartridge, tape drive cabling, adapter board, tape drive, or system board assembly. Table 3-12 Tape Drive Test Error Codes Error Code Description 1900-xx Tape ID failed. 1901-xx Tape servo write failed. 1902-xx Tape format failed. 1903-xx Tape drive sensor test failed. 1904-xx Tape BOT/EOT test failed. 1905-xx Tape read test failed. 1906-xx Tape write/read/compare test failed. Recommended Action The following steps apply to error codes 1900-xx through 1906-xx: 1. Replace the tape cartridge and retest. 2. Check and/or replace the signal cable and retest. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the tape adapter board (if applicable) and retest. 5. Replace the tape drive and retest. 6. Replace the system board and retest. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide