Compaq ProLiant 1200 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 20
Symbols in Equipment, Preparation Procedures, Removal and Replacement Procedures
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2-2 Removal and Replacement Procedures Symbols in Equipment CLASS 1 LASER PRODUCT WARNING: Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, allow the surface to cool before touching. WARNING: Any surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. The enclosed area contains no operator serviceable parts. To reduce the risk of injury from electrical shock hazards, do not open this enclosure. WARNING: Any RJ-45 receptacle marked with these symbols indicates a Network Interface Connection. To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into this receptacle. WARNING: This label or equivalent is located on the surface of your CD-ROM drive. This label indicates that the product is classified as a CLASS 1 LASER PRODUCT. Preparation Procedures Before beginning any of the removal and replacement procedures for non-hot-plug devices: 1. Turn off the server. 2. Disconnect the AC power cord from the AC outlet, then from the server. 3. Disconnect all external peripheral devices from the server. 4. For some removal and replacement procedures, you must remove the server from the rack and place it on a sturdy table or workbench. Refer to the ProLiant 1600 and ProLiant 1200 Servers Setup and Installation Guide for instructions.