Compaq ProLiant 1200 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 58
Power-On Self-Test POST, Table 3-1, POST Error Messages
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3-4 Diagnostic Tools Power-On Self-Test (POST) POST is a series of diagnostic tests that runs automatically on Compaq computers when the system is turned on. POST checks the following assemblies to ensure that the computer system is functioning properly: s Keyboard s Power supply s System board s Memory s Memory expansion boards s Controllers s Diskette drives s Hard drives If POST finds an error in the system, an error condition is indicated by an audible and/or visual message. If an error code is displayed on the screen during POST or after resetting the system, follow the instructions in Table 3-1. The error messages and codes listed in Table 3-1 include all codes generated by Compaq products. Your system generates only those codes that are applicable to your configuration and options. Table 3-1 POST Error Messages Error Code A Critical Error occurred prior to this powerup 101-ROM Error Audible Beeps L=Long S=Short None 1L,1S 101-I/O ROM Error None 102-System Board Failure None Probable Source of Problem Action A catastrophic system error, which caused the server to crash, has been logged. System ROM checksum. Options ROM checksum. DMA, timers, etc. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Replace failed assembly as indicated. Run Diagnostics. Replace failed assembly as indicated. Replace the system board. Run the Compaq System Configuration Utility.