Compaq ProLiant 1200 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 25
Pivot each foot down, and pull it off the base of the chassis
![]() |
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2-7 Feet To remove the feet from the chassis, one at a time: 1. Perform the preparation procedures. See page 2-2. 2. Remove the front bezel. See page 2-6. 3. Place the server on its left side. 4. Remove the T-15 screw from each foot . 5. Pivot each foot down , and pull it off the base of the chassis . 3 2 1 Figure 2-2. Removing the Feet From the Chassis Reverse steps 1 through 5 to replace the feet. Make sure each foot snaps securely in its holders. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
![](/manual_guide/products/compaq-proliant-1200-compaq-proliant-1600-proliant-1200-servers-maintenance-service-guide-ff7de47/25.png)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-7
Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
Feet
To remove the feet from the chassis, one at a time:
1.
Perform the preparation procedures. See page 2-2.
2.
Remove the front bezel. See page 2-6.
3.
Place the server on its left side.
4.
Remove the T-15 screw from each foot
.
5.
Pivot each foot down
, and pull it off the base of the chassis
.
1
2
3
Figure 2-2.
Removing the Feet From the Chassis
Reverse steps 1 through 5 to replace the feet. Make sure each foot snaps securely
in its holders.