Compaq ProLiant 4500 ProLiant Server Troubleshooting Guide - Page 269
Wide SCSI transfer, than this controller supports.
View all Compaq ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
ADU Error Messages Table D-1: Array Diagnostic Utility (ADU) Error Messages continued Message Description Recommended Action Storage enclosure on SCSI bus X indicated that the fan is degraded. One or more fans in the external storage unit have failed. Replace the failed fans. SOLUTION: this condition usually occurs on enclosures with multiple fans and one of those fans has failed. Replace any fans not operating properly. Storage enclosure on SCSI bus X indicated that the fan module is unplugged. A fan in the external storage Check and reseat all fan unit is not connected properly. connections securely. SOLUTION: Make sure the fan module is properly connected. Storage enclosure on SCSI bus X - Wide SCSI transfer failed. SOLUTION: This may indicate a bad SCSI cable on bus X. Try replacing the cable. A cable on bus X has failed. 1. Replace the failed cable. 2. If that does not solve the problem, contact your authorized service provider. Swapped cables or Configuration error detected. A configured array of drives was moved from another controller that supported more drives than this controller supports. SOLUTION: Upgrade the firmware on this controller. If this doesn't solve the problem, then power down system and move the drives back to the original controller. You have exceeded the maximum number of drives supported for this controller, and the connected controller was not part of the original array configuration. 1. Upgrade the firmware on this controller. 2. If the problem is not resolved: Replace this controller with the original controller. -Or- Replace this controller with a new controller that supports the number of drives in the array. continued HP Servers Troubleshooting Guide D-19