Compaq ProLiant 5000 Migrating to the Compaq ProLiant 5000 Server in Microsoft - Page 4

496A/0197 WHITE PAPER (cont.) ... TABLE 1 MIGRATION CHECKLIST Description Requires Update Update Available Comments Windows NT Server 4.0 Optional Service Pack 1-2 Service Packs 1-2 are supported Windows NT SSD, version 1.19 and earlier Yes Windows NT SSD, version 1.20 Updated systems management or later drivers required SMART Controller Optional SMART-2/P Controller The ProLiant 5000 Server is optimized for PCI Drive Array Controllers SMART-2/P Controller with Windows NT SSD, version 1.19 Optional Windows NT SSD, version 1.20 or later Should update with management driver required above Compaq SCSI-2 Hard Drives (Hot Pluggable) Optional Compaq SCSI-2 Fast-Wide Hard Drives (Hot Pluggable) Use Compaq SCSI-2 Fast-Wide Hard Drives for increased performance Compaq SIMM memory options Yes Compaq DIMM memory options SIMM memory options are not compatible NetFlex, NetFlex-2, and NetFlex-3/E family of network controllers Optional NetFlex-3/P and Nettelligent PCI network controllers The ProLiant 5000 Server is optimized for PCI network controllers NetFlex-3/P network controller and Windows NT SSD, version 1.19 Optional Windows NT SSD, version 1.20 or greater Should update with management driver required above ProLiant 1500, 2000, 4000 and 4500 processor board options Yes ProLiant 5000 Server processor ProLiant 5000 Server requires board options Pentium Pro processor board options Compaq Tape Drive options No N/A All Compaq tape drive options are supported The check list shown in Table 1 should not be considered complete - individual configurations can vary. Network servers based on multiprocessing operating systems like Windows NT Server 4.0 are extremely complex. The migration scenarios illustrated in this document should be used as examples only. Your configuration and results can vary. 4