Compaq R6000 HP Uninterruptible Power System R6000 Models User Guide - Page 37
System Setup, Set Hardware Configuration, Table 3-5, Set HW Config Options
UPC - 743172638854
View all Compaq R6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
LCD Configuration and Status System Setup Select System Setup from the Main Menu to change the system configuration. To change the system setup, a password is required. 1. Choose the first digit using the up and down arrow keys on the Center button. 2. Press the right arrow key on the Center button to move to the next digit. 3. To change a digit, use the left arrow key on the Center button to go back. 4. After the entire password has been entered, press the Enter button. NOTE: The password must be six characters long. The default password is "COMPAQ." Enter Password COMPAQ Set Hardware Configuration Select Set HW Config from the System Setup menu to set up load segments and batteries for the UPS. System Setup → Set HW Config Table 3-5 lists the options under the Set HW Config menu. Table 3-5: Set HW Config Options LCD Display Set HW Config → Load Segments Load Segments (0-5) Set HW Config → Battery Amp-Hr Battery Amp-Hr Internal 0-25 Explanation Accesses the Load Segments option. Allows specification of the number of individually controllable load segments (from 1 to 5). Accesses the Battery Amp-Hr option. Sets the Amp-Hour Rating of each cabinet, or configures the number of external battery cabinets. Choose 5 A-H for the UPS batteries, and 5 A-H for each additional ERM, using the Center and Enter buttons. 3-10 HP Uninterruptible Power System R6000 Models User Guide HP CONFIDENTIAL Codename: Arcuda Part Number: 347223-003 Last Saved On: 12/13/02 12:54 PM