Compaq R6000 HP Uninterruptible Power System R6000 Models User Guide - Page 43

Removing the Battery Pack

Page 43 highlights

Battery Maintenance Removing the Battery Pack To replace the batteries:. 1. Place the UPS in Bypass mode using the manual switch located at the rear of the UPS. Figure 4-1: Placing the UPS in Manual Bypass mode 2. Using a Philips screwdriver, remove the lower front bezel by backing off the captive screws on each side. Figure 4-2: Removing screws from the lower front bezel HP Uninterruptible Power System R6000 Models User Guide 4-3 HP CONFIDENTIAL Codename: Arcuda Part Number: 347223-003 Last Saved On: 12/12/02 2:44 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Battery Maintenance
HP Uninterruptible Power System R6000 Models User Guide
4-3
HP CONFIDENTIAL
Codename: Arcuda Part Number: 347223-003 Last Saved On: 12/12/02 2:44 PM
Removing the Battery Pack
To replace the batteries:.
1.
Place the UPS in Bypass mode using the manual switch located at the rear of the UPS.
Figure 4-1:
Placing the UPS in Manual Bypass mode
2.
Using a Philips screwdriver, remove the lower front bezel by backing off the captive
screws on each side.
Figure 4-2:
Removing screws from the lower front bezel