Compaq R6000 HP Uninterruptible Power System R6000 Models User Guide - Page 45

Removing the battery pack attachment screws, Sliding out the battery packs

Get Compaq R6000 - UPS - Lead Acid Expandable PDF manuals and user guides
UPC - 743172638854
View all Compaq R6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Battery Maintenance 5. Remove the battery pack attachment screws using a #2 Philips screwdriver. Figure 4-5: Removing the battery pack attachment screws 6. Slide out the battery packs. WARNING: To reduce the risk of personal injury or damage to the equipment: • Observe local Occupational Safety requirements and guidelines for manual material handling. • Obtain adequate assistance to lift and stabilize the assemblies during installation or removal. • Battery packs (2 per unit) weigh 34 kg (75 lb) each. Figure 4-6: Sliding out the battery packs WARNING: Batteries retain high voltage. As soon as the replacement batteries are safely in place in the UPS chassis, remove the battery connector covers and place them on the batteries that were removed from the unit. 7. Set aside the used battery packs for proper disposal. Refer to the section, "Disposing of Used Batteries," in this chapter. HP Uninterruptible Power System R6000 Models User Guide 4-5 HP CONFIDENTIAL Codename: Arcuda Part Number: 347223-003 Last Saved On: 12/12/02 2:44 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Battery Maintenance
HP Uninterruptible Power System R6000 Models User Guide
4-5
HP CONFIDENTIAL
Codename: Arcuda Part Number: 347223-003 Last Saved On: 12/12/02 2:44 PM
5.
Remove the battery pack attachment screws using a #2 Philips screwdriver.
Figure 4-5:
Removing the battery pack attachment screws
6.
Slide out the battery packs.
WARNING:
To reduce the risk of personal injury or damage to the equipment:
•
Observe local Occupational Safety requirements and guidelines for manual
material handling.
•
Obtain adequate assistance to lift and stabilize the assemblies during
installation or removal.
•
Battery packs (2 per unit) weigh 34 kg (75 lb) each.
Figure 4-6:
Sliding out the battery packs
WARNING:
Batteries retain high voltage. As soon as the replacement batteries are
safely in place in the UPS chassis, remove the battery connector covers and place
them on the batteries that were removed from the unit.
7.
Set aside the used battery packs for proper disposal. Refer to the section, “Disposing of
Used Batteries,” in this chapter.