Compaq R6000 HP Uninterruptible Power System R6000 Models User Guide - Page 40

Set Voltage, Set Site Fault, Set Sleep Mode - user manual

Get Compaq R6000 - UPS - Lead Acid Expandable PDF manuals and user guides
UPC - 743172638854
View all Compaq R6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

LCD Configuration and Status Set Voltage Select Set Voltage from the System Setup menu to set the UPS voltage. CAUTION: Use the switch on the rear panel to place the UPS in manual Bypass mode. Then, press the Standby button on the front panel to place the UPS in Standby mode before setting the UPS voltage. The options for voltage are 200, 208, 220, 230, 240, 208/230 Auto Sensing, and 230 Extended. An asterisk (*) signifies the current configuration. Set Voltage * 208 V Set Site Fault Select Set Site Fault to enable or disable the Site Wiring Fault alarm. An asterisk (*) signifies the current configuration. Set Site Fault * Enable Set Sleep Mode Select Set Sleep Mode from the System Setup menu to enable or disable Sleep mode. An asterisk (*) signifies the current configuration. NOTE: When Sleep mode is enabled, if the UPS is supplying battery power and the load on the UPS is less than eight percent, the UPS switches to Sleep mode and the UPS turns off . Set Sleep Mode * Enable HP Uninterruptible Power System R6000 Models User Guide 3-13 HP CONFIDENTIAL Codename: Arcuda Part Number: 347223-003 Last Saved On: 12/13/02 12:54 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
LCD Configuration and Status
HP Uninterruptible Power System R6000 Models User Guide
3-13
HP CONFIDENTIAL
Codename: Arcuda Part Number: 347223-003 Last Saved On: 12/13/02 12:54 PM
Set Voltage
Select Set Voltage from the System Setup menu to set the UPS voltage.
CAUTION:
Use the switch on the rear panel to place the UPS in manual Bypass mode. Then,
press the Standby button on the front panel to place the UPS in Standby mode before setting
the UPS voltage.
The options for voltage are 200, 208, 220, 230, 240, 208/230 Auto Sensing,
and 230 Extended. An asterisk (*) signifies the current configuration.
Set Voltage
*
208 V
Set Site Fault
Select Set Site Fault to enable or disable the Site Wiring Fault alarm. An asterisk (*) signifies
the current configuration.
Set Site Fault
*
Enable
Set Sleep Mode
Select Set Sleep Mode from the System Setup menu to enable or disable Sleep mode. An
asterisk (*) signifies the current configuration.
NOTE:
When Sleep mode is enabled, if the UPS is supplying battery power and the load on the UPS is
less than eight percent, the UPS switches to Sleep mode and the UPS turns off .
Set Sleep Mode
*
Enable