Compaq dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 16

Setup Utilities and Diagnostics Features Heading Standard CMOS Features (continued) Advanced BIOS Features Option POST Delay Device Boot Disabling F9 Boot Menu Removable Device Boot Priority Hard Disk Boot Seq. Optical Drive Boot Sequence Network Boot Sequence First Boot Device Second Boot Device Third Boot Device Fourth Boot Device Boot Up NumLock Status Description Allows you to set a POST delay to: • 0 seconds • 5 seconds • 10 seconds • 15 seconds • 30 seconds Allows you to restrict a device from booting the unit. You can disable as a bootable device: • None • USB • Internal ODD • Internal FDD • USB + ODD + FDD Disables/enables F9 Boot Menu Allows you to specify the order of attached removable devices (such as Legacy Floppy or USB FDD) The first drive in the order has priority in the boot sequence and is recognized as drive A. Allows you to specify the order of attached hard drive devices (such as USB HDD storage, USB2 Drive Key, or USB flash media). The first drive in the order has priority in the boot sequence and is recognized as drive C (if any devices are attached). Allows you to specify the order in which attached optical drives (including USB ODD) are checked for a bootable operating system image. Allows you to specify the order in which network devices (including UP NIC cards) are checked for a bootable operating system image. Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the three: • Removable • Hard Disk • Optical Drive • Network • Disabled ✎ MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has started. Allows you to set the default NumLock status to off or on. 2-6 415606-001 Service Reference Guide, dx2200 MT